Hi Tech Air Solutions- before and after testing

In 2011-2012, my family became so sick from mold we through out almost everything we owned and spent nearly $50,000 on mold remediation in our home. We ripped our home down to studs and cleaned every inch and then put it back together with the most eco-friendly materials we could afford.

I think if we had known about the Hi Tech air reactors then, we could have saved all or most of our stuff and avoided the cost of mold remediation. I am so happy people are able to stay in their homes and regain their health using the Hi Tech air reactors. It gives me great joy to share them with people because finally, there is a simple solution.

Plug it in and Breathe!!!

My son got very sick while living at his dad’s. We tested 3 rooms in the building where my son spends time. The results were — very high mold and other contaminants in the air. We installed Hi Tech air reactors– both the #101 and the #110. Here are the before and after air test results.

The most drastic reduction of contaminants in the air was on the first floor where the #110 was running from January 10 through January 26. This room is approximately 2,000 square feet with 16 foot ceilings.

What the above before and after comparison says is that in the before test (first column) there was so much mold, they couldn’t count it. You could smell mold when you entered the building. It was enough to make me sick immediately.

In the after test (second column), after running the Hi Tech Model #110 for 16 days… the percent coverage went from 80% to 3%. I spent over 2 hours in this room and I felt great!

The #110 is the workhorse of the air reactors available from Hi Tech. It is (40″ x 21″ x 27″) portable (on wheels) unit and is designed for the eradication of viruses, bacteria, mold, mildew,odors, pet dander, formaldehyde, as well as VOCs in small rooms, buildings, or homes.

---

The next room we tested (before and after) was a studio apartment on the 2nd floor. We had the Hi Tech model #101 running in this apartment from January 17 through January 26th. This room is approximately 900 square feet with 12 foot ceilings.

You’ll see the before in the first column(before) compared to the second column(after), it looks like some of the molds actually went up. But the overall percent coverage is down by more than 60%. And some of the molds and Hyphal Fragments are down significantly also.

The Model #101 is the smallest model and therefore it takes longer to see the complete removal of all contaminants from the air. It’s the “little engine that could” because it keeps on working on cleaning the air. Over time, these numbers will improve even more. They always do.

This smaller model is designed for use in small rooms or to be used over a longer period of time for treatment. It can be used as a whole house unit of 1600 sq. ft. or less. It is made of stainless steel/hospital grade (14″ x 15″ x 7″) and is designed for the eradication of viruses, bacteria, mold, mildew, odors, pet dander, formaldehyde, as well as VOCs in small rooms, buildings, or homes.

---

The next room we tested is the 2nd Floor Apartment. This is approximately an 1100 square foot apartment with 10 foot ceilings. It is directly above the room where the #110 is running and it looks like it got some benefit from that machine running downstairs! We had the Hi Tech #101 running in this room from January 10th through January 17th.

You’ll see the before in the first column(before) compared to the second column(after), most of the molds went down and some of them went down to zero. But the overall percent coverage is down by more than 80%.

Overall… these tests show the amazing results I feel!

I couldn’t visit my children in this building before running the Hi Tech air reactors because I am highly sensitive to mold and I would get sick if I spent any time in the building. Now, I can go there and I feel fine. I spent 5 1/2 hours over there in one day… and I had zero allergic or toxic reactions.

If you would like to learn more about the Hi Tech air reactors, you can join the discussion we are having on in our support group: Toxic Mold: Health Advocates Unite

Like the Hi Tech Air Solutions Facebook page or find out more about the air reactors at their website: http://hitechairsolutions.com

Hi Tech Air Solutions stands behind their product with a 100% money back guarantee based on performance. They could not do that if these did not work as well as they say they work. We have never had a return because the air reactor does not work… it works. Just plug it in and breathe.

Disclaimer: I believe in these air reactors so much that I have become a sales rep for Hi Tech Air Solutions. This in no way influences my opinion of these machines or the test results I am sharing on this page. I was helped tremendously by the Hi Tech air reactors and then I decided to tell other people about them.

If it bothers you that I sell them, don’t let that stop you from buying one… find another sales representative. I encourage you to do what I did, call Ray Robison (405) 820-3762
He is the owner and inventor of these air reactors and I am so glad I found him.

Wishing you nothing but good health and clean air!